China S Series Flange Mounted Helical Worm Gearbox S/SA/Sf/Saf worm gearbox advantages

Product Description

S Collection Flange Mounted Helical Worm Gearbox S/SA/Sf/Saf

 

Enter Configurations

Direct motor coupled

With IEC B5/B14 motor flange

With IEC B5/B14 motor mounted

With solid input shaft

Output Configurations

 

Sound output shaft

Reliable output shaft with flange

Hollow output shaft

Hollow output shaft with flange

Variants of the Helical Worm Equipment Unit Series S / SF / SA / SAF

Foot- or flange-mounted

B5 or B14 flange-mounted

Sound shaft or hollow shaft

Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

 

Technical Data:

Housing content Cast iron/Ductile iron
Housing hardness HBS190-240
Equipment content 20CrMnTi alloy metal
Floor hardness of gears HRC58°~sixty two °
Equipment main hardness HRC33~forty
Enter / Output shaft materials 42CrMo alloy steel
Enter / Output shaft hardness HRC25~30
Machining precision of gears precise grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Warmth therapy tempering, cementiting, quenching, and so on.
Performance ninety four%~ninety six% (is dependent on the transmission stage)
Noise (MAX) 60~68dB
Temp. rise (MAX) 40°C
Temp. increase (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Model of bearings China best manufacturer bearing, HRB/LYC/ZWZ/C&U. Or other makes requested, NSK.
Brand of oil seal NAK — ZheJiang or other brands requested

Features

Large modular layout, adaptable mounting manner.
Built-in casting housing,compact dimension, stable transmitting and lower noise degree.
Best oil leakage stopping tends to make the very good sealings and can be utilized in wide variety of industry.
Innovative equipment grinding and modified profile, substantial loading support and much more risk-free operation.
High efficiency and conserve electricity.
Preserve price and reduced upkeep.

Specification

Design

Shaft Dia.

mm

Horizontal Center Peak mm

External Flange Dia.

 mm

Energy

(kw)

Ratio

(i)

Nominal Torque

(Nm)

Solid Shaft

Hollow Shaft

S/SF/SA/SAF37

ф20

ф20

88

 

.12-.fifty five

24-204

one hundred

S/SF/SA/SAF47

ф25

ф30 / ф25

100

one hundred sixty

.18-.75

24-204

150

S/SF/SA/SAF57

ф30

ф35 / ф30

112

two hundred

.seventy five-1.5

24-204

250

S/SF/SA/SAF67

ф35

ф45 /ф40

a hundred and forty

200

.75-3

24-285

460

S/SF/SA/SAF77

ф45

ф60 / ф50

one hundred eighty

250

.75-7.5

24-385

1200

S/SF/SA/SAF87

ф60

ф70 / ф60

225

350

one.1-11

24-389

2000

S/SF/SA/SAF97

ф70

ф90 / ф70

280

450

1.5-18.five

24-389

3500

Firm profile

Scenario

Packing

FAQ

Q1: I want to get your products, how can I pay out?
A: You can pay out by way of T/T(30%+70%), L/C ,D/P and so forth. 

Q2: How can you guarantee the high quality?
A: One year’s guarantee against B/L day. If you fulfill with good quality difficulty, you should ship us images or online video to check out, we guarantee to send spare components or new products to replace. Our assure not contain inappropriate procedure or wrong specification selection. 

Q3: How we choose models and specifications?
A: You can e mail us the sequence code (for example: RC series helical gearbox) as effectively as need specifics, this kind of as motor power,output velocity or ratio, provider element or your software…as much data as achievable. If you can provide some images or drawings,it is great. 

This autumn: If we will not uncover what we want on your site, what need to we do?
A: We offer 3 options:
one, You can e-mail us the images, drawings or descriptions particulars. We will attempt to design and style your goods on the foundation of our
normal types.
two, Our R&D division is expert for OEM/ODM merchandise by drawing/samples, you can ship us samples, we do tailored style for your bulk getting.
three, We can produce new merchandise if they have great marketplace. We have currently designed several things for special utilizing productive, such as special gearbox for agitator, cement conveyor, sneakers machines and so on. 

Q5: Can we buy 1 laptop of each product for high quality testing?
A: Sure, we are happy to take demo order for quality screening.

Q6: How about your item supply time?
A: Typically for 20’container, it takes twenty five-thirty workdays for RV sequence worm gearbox, 35-40 workdays for helical gearmotors.

US $80-200
/ Piece
|
2 Pieces

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: M1-M6
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step

###

Customization:

###

Input Configurations
Direct motor coupled
With IEC B5/B14 motor flange
With IEC B5/B14 motor mounted
With solid input shaft
Output Configurations
 
Solid output shaft
Solid output shaft with flange
Hollow output shaft
Hollow output shaft with flange
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

###

Housing material Cast iron/Ductile iron
Housing hardness HBS190-240
Gear material 20CrMnTi alloy steel
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input / Output shaft material 42CrMo alloy steel
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage)
Noise (MAX) 60~68dB
Temp. rise (MAX) 40°C
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, NSK.
Brand of oil seal NAK — Taiwan or other brands requested

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
S/SF/SA/SAF37
ф20
ф20
88
 
0.12-0.55
24-204
100
S/SF/SA/SAF47
ф25
ф30 / ф25
100
160
0.18-0.75
24-204
150
S/SF/SA/SAF57
ф30
ф35 / ф30
112
200
0.75-1.5
24-204
250
S/SF/SA/SAF67
ф35
ф45 /ф40
140
200
0.75-3
24-285
460
S/SF/SA/SAF77
ф45
ф60 / ф50
180
250
0.75-7.5
24-385
1200
S/SF/SA/SAF87
ф60
ф70 / ф60
225
350
1.1-11
24-389
2000
S/SF/SA/SAF97
ф70
ф90 / ф70
280
450
1.5-18.5
24-389
3500
US $80-200
/ Piece
|
2 Pieces

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: M1-M6
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step

###

Customization:

###

Input Configurations
Direct motor coupled
With IEC B5/B14 motor flange
With IEC B5/B14 motor mounted
With solid input shaft
Output Configurations
 
Solid output shaft
Solid output shaft with flange
Hollow output shaft
Hollow output shaft with flange
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

###

Housing material Cast iron/Ductile iron
Housing hardness HBS190-240
Gear material 20CrMnTi alloy steel
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input / Output shaft material 42CrMo alloy steel
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage)
Noise (MAX) 60~68dB
Temp. rise (MAX) 40°C
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, NSK.
Brand of oil seal NAK — Taiwan or other brands requested

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
S/SF/SA/SAF37
ф20
ф20
88
 
0.12-0.55
24-204
100
S/SF/SA/SAF47
ф25
ф30 / ф25
100
160
0.18-0.75
24-204
150
S/SF/SA/SAF57
ф30
ф35 / ф30
112
200
0.75-1.5
24-204
250
S/SF/SA/SAF67
ф35
ф45 /ф40
140
200
0.75-3
24-285
460
S/SF/SA/SAF77
ф45
ф60 / ф50
180
250
0.75-7.5
24-385
1200
S/SF/SA/SAF87
ф60
ф70 / ф60
225
350
1.1-11
24-389
2000
S/SF/SA/SAF97
ф70
ф90 / ф70
280
450
1.5-18.5
24-389
3500

Is a worm gear reducer gearbox right for your application?

If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
worm reducer

This is a reducer gearbox

Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm reducer

It is high efficiency

When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.

It has a low clearance

Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm reducer

It has a high torque to weight ratio

The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China S Series Flange Mounted Helical Worm Gearbox S/SA/Sf/Saf     worm gearbox advantagesChina S Series Flange Mounted Helical Worm Gearbox S/SA/Sf/Saf     worm gearbox advantages
editor by czh 2023-01-26