Tag Archives: belt

China Electric Motor Gear Speed Reducer Worm Gearbox for Belt Transmission worm gearbox calculation

Product Description

 

Product Description

Main Resources:
one)housing:aluminium alloy ADC12(measurement 571-090) die solid iron HT200(measurement one hundred ten-a hundred and fifty)
two)Worm:20Cr, ZI Involute profile carbonize&quencher warmth therapy make gear floor hardness up to 56-62 HRC Following precision grinding, carburization layer’s thickness amongst .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1

Detailed Photos

Mix Possibilities:
Input:with input shaft, With square flange,With IEC common input flange
Output:with torque arm, output flange, solitary output shaft, double output shaft, plastic cover
Worm reducers are obtainable with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Personal computer, NMRV+UDL, NMRV+MOTORS

Exploded Look at:

Solution Parameters

 
Previous Model     
  New Model     Ratio     Center Distance  Energy Input Dia.  Output Dia.    Output Torque Weight
RV571     7.5~100   25mm   .06KW~.12KW  Φ9 Φ11 21N.m  .7kgs
RV030 RW030 seven.5~a hundred 30mm   .06KW~.25KW Φ9(Φ11) Φ14 45N.m  1.2kgs
RV040 RW040 7.5~100 40mm   .09KW~.55KW Φ9(Φ11,Φ14) Φ18(Φ19) 84N.m  two.3kgs
RV050 RW050 7.5~one hundred 50mm   .12KW~1.5KW Φ11(Φ14,Φ19) Φ25(Φ24) 160N.m  3.5kgs
RV063 RW063 7.5~one hundred 63mm   .18KW~2.2KW Φ14(Φ19,Φ24) Φ25(Φ28) 230N.m  six.2kgs
RV075 RW075 seven.5~one hundred 75mm   .25KW~4.0KW Φ14(Φ19,Φ24,Φ28)  Φ28(Φ35) 410N.m  nine.0kgs
RV090 RW090 7.5~one hundred 90mm   .37KW~4.0KW Φ19(Φ24,Φ28) Φ35(Φ38) 725N.m  13.0kgs
RV110 RW110 seven.5~100 110mm   .55KW~7.5KW Φ19(Φ24,Φ28,Φ38)   Φ42 1050N.m  35.0kgs
RV130 RW130 seven.5~a hundred 130mm   .75KW~7.5KW Φ24(Φ28,Φ38) Φ45 1550N.m  forty eight.0kgs
RV150 RW150 7.5~100 150mm     2.2KW~15KW Φ28(Φ38,Φ42) Φ50   eighty four.0kgs

GMRV Define Dimension:

GMRV A B C C1 D(H8) E(h8) F G G1 H H1 I M N O P Q R S T BL β b t V  
030 80 97 fifty four forty four 14 55 32 56 63 sixty five 29 fifty five forty 57 thirty 75 forty four 6.five 21 5.5 M6*10(n=4) five 16.three 27
040 a hundred 121.5 70 60 18(19) sixty 43 71 seventy eight seventy five 36.5 70 50 seventy one.five forty 87 55 six.five 26 6.five M6*10(n=4) 45° six 20.8(21.8) 35
050 a hundred and twenty 144 80 70 25(24) 70 forty nine 85 92 eighty five forty three.five 80 sixty 84 50 a hundred 64 8.five 30 7 M8*twelve(n=4) 45° eight 28.3(27.3) 40
063 a hundred and forty four 174 a hundred 85 twenty five(28) 80 sixty seven 103 112 ninety five 53 95 seventy two 102 63 a hundred and ten 80 8.five 36 eight M8*12(n=8) 45° 8 28.3(31.3) 50
075 172 205 a hundred and twenty 90 28(35) ninety five seventy two 112 a hundred and twenty a hundred and fifteen 57 112.5 86 119 75 one hundred forty ninety three 11 forty ten M8*14(n=8) 45° eight(ten) 31.3(38.3) 60
090 206 238 a hundred and forty a hundred 35(38) one hundred ten seventy four a hundred thirty one hundred forty one hundred thirty sixty seven 129.5 103 135 90 160 102 thirteen 45 eleven M10*sixteen(n=8) 45° 10 38.3(forty one.3) 70
one hundred ten 255 295 a hundred and seventy a hundred and fifteen 42 a hundred thirty one hundred forty four 155 165 74 a hundred and sixty 127.5 167.5 a hundred and ten 200 a hundred twenty five fourteen 50 14 M10*18(n=8) 45° twelve 45.three 85
130 293 335 two hundred 120 forty five one hundred eighty one hundred fifty five one hundred seventy 215 81 179 146.5 187.5 a hundred thirty 250 140 16 60 15 M12*20(n=8) 45° 14 forty eight.8 a hundred
150 340 four hundred 240 145 50 a hundred and eighty 185 200 215 ninety six 210 170 230 a hundred and fifty 250 one hundred eighty 18 72.5 eighteen M12*22(n=8) 45° 14 fifty three.eight  120  

Organization Profile

About CZPT Transmission:
We are a professional reducer producer situated in HangZhou, ZHangZhoug province.
Our leading goods is  full range of RV571-one hundred fifty worm reducers , also equipped GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop models, UDL Variators and AC Motors, G3 helical gear motor.
Items are broadly used for programs these kinds of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-producing, construction machinery, metallurgic mine, environmental defense engineering, and all sorts of automatic strains, and assembly lines.
With quick supply, outstanding soon after-sales provider, innovative generating facility, our items market well  both at residence and overseas. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our purpose is to create and innovate on basis of high high quality, and develop a good track record for reducers.

 Packing data:Plastic Baggage+Cartons+Wooden Instances , or on ask for
We take part Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Earn Eurasia 

Logistics

Right after Sales Support

1.Upkeep Time and Guarantee:Inside 1 calendar year soon after receiving goods.
2.Other ProviderSuch as modeling assortment guidebook, set up manual, and issue resolution information, etc.

FAQ

1.Q:Can you make as for each client drawing?
   A: Sure, we supply personalized support for customers appropriately. We can use customer’s nameplate for gearboxes.
2.Q:What is your phrases of payment ?
   A: thirty% deposit prior to production,equilibrium T/T just before supply.
3.Q:Are you a trading business or maker?
   A:We are a manufacurer with sophisticated equipment and experienced workers.
four.Q:What’s your generation capability?
   A:8000-9000 PCS/Month
5.Q:Cost-free sample is obtainable or not?
   A:Indeed, we can offer cost-free sample if buyer concur to pay out for the courier expense
6.Q:Do you have any certificate?
   A:Indeed, we have CE certification and SGS certificate report.

Make contact with information:
Ms Lingel Pan
For any questions just come to feel cost-free ton contact me. Numerous many thanks for your variety consideration to our organization!


/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Right Angle
Gear Shape: Worm Gear
Step: Double-Step

###

Samples:
US$ 12/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

 
Old Model     
  New Model     Ratio     Center Distance  Power Input Dia.  Output Dia.    Output Torque Weight
RV025     7.5~100   25mm   0.06KW~0.12KW  Φ9 Φ11 21N.m  0.7kgs
RV030 RW030 7.5~100 30mm   0.06KW~0.25KW Φ9(Φ11) Φ14 45N.m  1.2kgs
RV040 RW040 7.5~100 40mm   0.09KW~0.55KW Φ9(Φ11,Φ14) Φ18(Φ19) 84N.m  2.3kgs
RV050 RW050 7.5~100 50mm   0.12KW~1.5KW Φ11(Φ14,Φ19) Φ25(Φ24) 160N.m  3.5kgs
RV063 RW063 7.5~100 63mm   0.18KW~2.2KW Φ14(Φ19,Φ24) Φ25(Φ28) 230N.m  6.2kgs
RV075 RW075 7.5~100 75mm   0.25KW~4.0KW Φ14(Φ19,Φ24,Φ28)  Φ28(Φ35) 410N.m  9.0kgs
RV090 RW090 7.5~100 90mm   0.37KW~4.0KW Φ19(Φ24,Φ28) Φ35(Φ38) 725N.m  13.0kgs
RV110 RW110 7.5~100 110mm   0.55KW~7.5KW Φ19(Φ24,Φ28,Φ38)   Φ42 1050N.m  35.0kgs
RV130 RW130 7.5~100 130mm   0.75KW~7.5KW Φ24(Φ28,Φ38) Φ45 1550N.m  48.0kgs
RV150 RW150 7.5~100 150mm     2.2KW~15KW Φ28(Φ38,Φ42) Φ50   84.0kgs

###

GMRV A B C C1 D(H8) E(h8) F G G1 H H1 I M N O P Q R S T BL β b t V  
030 80 97 54 44 14 55 32 56 63 65 29 55 40 57 30 75 44 6.5 21 5.5 M6*10(n=4) 5 16.3 27
040 100 121.5 70 60 18(19) 60 43 71 78 75 36.5 70 50 71.5 40 87 55 6.5 26 6.5 M6*10(n=4) 45° 6 20.8(21.8) 35
050 120 144 80 70 25(24) 70 49 85 92 85 43.5 80 60 84 50 100 64 8.5 30 7 M8*12(n=4) 45° 8 28.3(27.3) 40
063 144 174 100 85 25(28) 80 67 103 112 95 53 95 72 102 63 110 80 8.5 36 8 M8*12(n=8) 45° 8 28.3(31.3) 50
075 172 205 120 90 28(35) 95 72 112 120 115 57 112.5 86 119 75 140 93 11 40 10 M8*14(n=8) 45° 8(10) 31.3(38.3) 60
090 206 238 140 100 35(38) 110 74 130 140 130 67 129.5 103 135 90 160 102 13 45 11 M10*16(n=8) 45° 10 38.3(41.3) 70
110 255 295 170 115 42 130 144 155 165 74 160 127.5 167.5 110 200 125 14 50 14 M10*18(n=8) 45° 12 45.3 85
130 293 335 200 120 45 180 155 170 215 81 179 146.5 187.5 130 250 140 16 60 15 M12*20(n=8) 45° 14 48.8 100
150 340 400 240 145 50 180 185 200 215 96 210 170 230 150 250 180 18 72.5 18 M12*22(n=8) 45° 14 53.8  120  

/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Right Angle
Gear Shape: Worm Gear
Step: Double-Step

###

Samples:
US$ 12/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

 
Old Model     
  New Model     Ratio     Center Distance  Power Input Dia.  Output Dia.    Output Torque Weight
RV025     7.5~100   25mm   0.06KW~0.12KW  Φ9 Φ11 21N.m  0.7kgs
RV030 RW030 7.5~100 30mm   0.06KW~0.25KW Φ9(Φ11) Φ14 45N.m  1.2kgs
RV040 RW040 7.5~100 40mm   0.09KW~0.55KW Φ9(Φ11,Φ14) Φ18(Φ19) 84N.m  2.3kgs
RV050 RW050 7.5~100 50mm   0.12KW~1.5KW Φ11(Φ14,Φ19) Φ25(Φ24) 160N.m  3.5kgs
RV063 RW063 7.5~100 63mm   0.18KW~2.2KW Φ14(Φ19,Φ24) Φ25(Φ28) 230N.m  6.2kgs
RV075 RW075 7.5~100 75mm   0.25KW~4.0KW Φ14(Φ19,Φ24,Φ28)  Φ28(Φ35) 410N.m  9.0kgs
RV090 RW090 7.5~100 90mm   0.37KW~4.0KW Φ19(Φ24,Φ28) Φ35(Φ38) 725N.m  13.0kgs
RV110 RW110 7.5~100 110mm   0.55KW~7.5KW Φ19(Φ24,Φ28,Φ38)   Φ42 1050N.m  35.0kgs
RV130 RW130 7.5~100 130mm   0.75KW~7.5KW Φ24(Φ28,Φ38) Φ45 1550N.m  48.0kgs
RV150 RW150 7.5~100 150mm     2.2KW~15KW Φ28(Φ38,Φ42) Φ50   84.0kgs

###

GMRV A B C C1 D(H8) E(h8) F G G1 H H1 I M N O P Q R S T BL β b t V  
030 80 97 54 44 14 55 32 56 63 65 29 55 40 57 30 75 44 6.5 21 5.5 M6*10(n=4) 5 16.3 27
040 100 121.5 70 60 18(19) 60 43 71 78 75 36.5 70 50 71.5 40 87 55 6.5 26 6.5 M6*10(n=4) 45° 6 20.8(21.8) 35
050 120 144 80 70 25(24) 70 49 85 92 85 43.5 80 60 84 50 100 64 8.5 30 7 M8*12(n=4) 45° 8 28.3(27.3) 40
063 144 174 100 85 25(28) 80 67 103 112 95 53 95 72 102 63 110 80 8.5 36 8 M8*12(n=8) 45° 8 28.3(31.3) 50
075 172 205 120 90 28(35) 95 72 112 120 115 57 112.5 86 119 75 140 93 11 40 10 M8*14(n=8) 45° 8(10) 31.3(38.3) 60
090 206 238 140 100 35(38) 110 74 130 140 130 67 129.5 103 135 90 160 102 13 45 11 M10*16(n=8) 45° 10 38.3(41.3) 70
110 255 295 170 115 42 130 144 155 165 74 160 127.5 167.5 110 200 125 14 50 14 M10*18(n=8) 45° 12 45.3 85
130 293 335 200 120 45 180 155 170 215 81 179 146.5 187.5 130 250 140 16 60 15 M12*20(n=8) 45° 14 48.8 100
150 340 400 240 145 50 180 185 200 215 96 210 170 230 150 250 180 18 72.5 18 M12*22(n=8) 45° 14 53.8  120  

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.<brworm reducer

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm reducer

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China Electric Motor Gear Speed Reducer Worm Gearbox for Belt Transmission     worm gearbox calculationChina Electric Motor Gear Speed Reducer Worm Gearbox for Belt Transmission     worm gearbox calculation
editor by CX 2023-04-14

OEM manufacturer made in China – replacement parts – in Bamenda Cameroon High Quality Poly V Ribbed Belt with ISO Certificate with top quality

OEM  manufacturer  made in China - replacement parts -  in Bamenda Cameroon  High Quality Poly V Ribbed Belt with ISO Certificate with top quality

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 various branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Merchandise Name Toothed Belt/ Product No. AV13*975La
Model Identify HEIYI Port ZheJiang g
Application FAW-Large/Medium Obligation Vehicles Motor Kind/HP WEICHAI Energy 336HP
Utilization Engine Cooling Technique/ H2o Pump Packing Plastic Bag/Carton  

We are the rubber solution manufacturing unit HEYI RUBBER Co.,Ltd,  specializing  in a variety of
of V belt(Fan Belt,Raw Edge V Belt,Variable Speed Belt,Joint V Belt),   oil seal and 
other  rubber  solution. Use for agriculture, industrial and automotive. Customized
support can be presented any time.

Solution Description:                                                           
The HEIYI® V RIBBED BELT, also termed poly v-belt, with the attribute V-ribs
which is resistant to oil and temperature stresses, static dissipating. The  belts  are
designed to increase ability with outstanding performance  at higher  speeds on
more compact diameter pulleys.  The  v-profiles  of  the  belt  are  in  a  particular formulated
rubber compound with direction oriented fibres that reduce sounds and offer extremely large
adaptability and balance.

Product Identify Poly V Belt/Drive Belt/Supporter Belt/Serpentine Belt/V-ribbed Belt/ Length Selection 500mm-5000mm
Model Title HEIYI Port ZheJiang
Application Car/Industrial Belt Type PK/PJ/PL
Utilization Motor Cooling Technique/ Water Pump/ Industrial power transmission Packing Plastic Bag/Carton  

Application                                                                          
The  HEIYI®  V  RIBBED  BELT , can replace several traditional  belts  and reduce
operating fees noticeably.  The belt also distinguishes by themselves by their light
and vibration free procedure and long daily life.The low cross part of the multi-rib belt
tends to make it extremely versatile and permits it to be employed in serpentine drives.

All Series                                                                         

Factory                                                                                

The Exhibition                                                                    

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 various branches. For more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first gear manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our firm and the listed replacement components contained herein are not sponsored, accredited, or made by the OEM.

OEM  manufacturer  made in China - replacement parts -  in Bamenda Cameroon  High Quality Poly V Ribbed Belt with ISO Certificate with top quality

OEM  manufacturer  made in China - replacement parts -  in Bamenda Cameroon  High Quality Poly V Ribbed Belt with ISO Certificate with top quality

China Chain and sprocket factory : Horizontal compare belt drive and chain drive garage door openers China in Managua Nicaragua Industrial Steam Indirect Heating Rubber Vulcanization Autoclave with ce certificate top quality low price

China Chain and sprocket factory : Horizontal compare belt drive and chain drive garage door openers China in Managua Nicaragua  Industrial Steam Indirect Heating Rubber Vulcanization Autoclave with ce certificate top quality low price

We – EPG Group the most significant Chain and agricultural gearbox manufacturing unit in China with 5 various branches. For more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Top quality and credit history are the bases that make a corporation alive. a specialized supplier of a full range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….EPG focus in electrical power transmission products Chain,pto shaft, agricultural gearboxes , CATV merchandise, mechanical seal, hydraulic and Pheumatic, and promotional merchandise.significant manufacturer and provider of ball bearings and electrical power transmission tools. Because it’s beginning in 1992, EPG has developed into a single of the leading suppliers in the business. Key elements that have contributed to our development is our devotion to the fundamentals of revolutionary layout, competitive pricing, excellent customer services, and solution availability. EPT chains, equally common and non-standard, are created of: ○ Higher good quality steels: dimensions and adapted chemical composition for the diverse chain parts ○ The most successful production processes: • Unique strategy for the creation of bushes improving the chain dress in resistance ( EPT know-how) • Plates made by multi-stage processing equipment making certain a standard pitch ( EPT technology) ○ Satisfactory mechanical and heat treatment options of chain components: • Shot peening • Surface finishing • Circumstance hardening, carbonitriding, quenching, tempering … • EPT®treatment • Freezing therapy • Corrosion security coatings (GEOMET, zinc, nickel plating, …) 1. Applications of SINOMAC Vulcanization Autoclave
Rubber vulcanization is a chemical process at a presented stress, temperature and time for converting natural rubber into much more durable materia EPT by the addition of sulfur. These additives modify the polymer by forming cross-links (bridges) between person polymer chains. Vulcanized materia EPT are less sticky and have exceptional mechanical houses. And vulcanization autoclave is utilized widely for this chemical method. The principal merchandise are galoshes, rubber tubes, cable, rubber roller, rubber ball, and many others.In this area, SINOMAC has been the chief, as we have accrued entire vulcanization encounter and technological innovation for many many years.

two. Basic Layout Data

2.1 Model and Dimensions

  • Autoclave design:    SN-LHGR2560
  • Powerful diameter:  2500mm
  • Successful duration:      6000mm

  Definition:  * Efficient diameter is the inner diameter of the autoclave.

                    * Efficient length is to level to do the real size of the shell.

2.2 Production Capability

  • Working circle of autoclave: can be set according to the operating method
  • Max measurement of pulley:                Ø2000X6000mm

two.3 Electric Energy

  • Operating voltage:          400V (AC)±5%, 3 stage, fifty Hz
  • Handle electrical power:                220VAC/50Hz/24VDC

2.4 H2o, Air and Steam Supply

  • Cooling water use:         ~4mthree/h
  • Cooling drinking water stress:               min.3 bar ~ max. 6 bar
  • Handle air of manage equipment:   5 ~ 7bar
  • Steam ability:                            2t/h

two.5 Environmental Problems

  • Max. air temperature:     +50ºC
  • Min air temperature:       -5ºC
  • Relative Humidity:          <80%
  • Altitude:                          <2000m

3. EPT Attribute and Doing work Process

three.1. EPT Characteristic
Autoclaves with immediate steam: heating and pressurization are carried out with steam. This heating system is particularly effective and indicated for items of massive sizes and excess weight. The temperature uniformity which generally may differ in between ±2°C,the trade ability, happening with condensation on colder surfaces, coupled with analyzed installations, permit to obtain excellent benefits.

3.2 Operating Method

3.2.1 StHangZhourd curing recipe

  Temp. setpoint Press. setpoint Temp. step length Push. step length
Segment1 T1 P1 t 1 P-t1
Segment2 T2 P2 t two P-t2
Segment3 T3 P3 t 3 P-t3
Segment4 T4 P4 t four P-t4
Segment5 T5 P5 t 5 P-t5
Segment6 T6   t six  
Segment7 T7   t seven  
Segment8 T8   t 8  
Segment9 T9   t 9  
Segment10 T10   t ten  
Segment11 T11   t 11  
Segment12 T12   t twelve  
Segment13 T13   t thirteen  
Segment14 T14   t fourteen  
Segment15 T15   t fifteen  

3.2.2 A brief curing recipe illustration

4. Tools Specialized Particulars

4.1 Pressure Vessel

  • Stress vessel with rapid-opening door, Design and style, Manufacture & Inspection: Code ASME Segment VIII, Div 1.
  • Shell Substance: SA-516
  • Cap Flange Material: ASTM-a hundred and five Forged
  • Shell Flange Substance: ASTM-one hundred and five Cast
  • Radiography Amount: a hundred% welding radiographic data are included
  • ASME stamping , Mother nature Of Inspection:a. Evaluation the style drawing and calculation sheet
    b. Verification of the material
    c. Overview welding procedure
    d. Assessment welder qualification
    e. Overview NDT personnel qualification
    f. Assessment NDT documentation
    g. Hydrostatic test

4.2 Door System

  • The closing system of the autoclave is the indented type assisted with a hydraulic method, in get to speedily and secured make a totally hermetic closing.
  • The complete method consists of 3 areas: a pair of gear flange, pushed gadgets and seal ring.
  • Hydraulically operated doorway opening and closing. It is controlled by PLC program.
  • The seal ring is made of silicon rubber.
  • Security pressure sensors have to avoid door opening in case of strain (allowed considerably less than .1 bars).

four.3 Thermal Insulation System
Interior Insulation and External Insulation
We use ceramic fiber as the insulation materials. The heat transfer coefficient is extremely minimal to make the warmth reduction to a bare minimum. The covering board of ceramic fiber is stainless metal. It is corrosion resistant and appears nice. Inner insulation design can get a lower energy usage, whilst external insulation design receives a higher one particular, but a much better temperature uniformity.

  • Insulation:Internal insulation layer
  • Insulation materials:Ceramic fiber 
  • Exterior sheet steel: stainless steel,1. mm
  • Insulation thickness:100mm

 4.4 Heating System

  • The heating system is a indirect steam sort.
  • The indirect technique will be via stainless-steel or copper tubing type warmth exchanger positioned on the rear facet of the autoclave among enthusiast and products. The flow have to transfer from materials to admirer, then go front door employing vessel facet to content
  • Heating Exchanger material :304 Stainless-steel with aluminum fin or copper tubing aluminum fin
  • Heating Exchanger type: Multi-row finned tubing

4.5 Air Recirculating Program

  • Sizzling air circulating duct
    Annular air-duct placed on the two aspect of the autoclave inside as the forward air shipping and delivery method. This layout features make the temperature a lot more uniform, and operating space much more large.  
  • The Motor supporter for circulation
    The motor is bolted to the rear of the autoclave, it drives the enthusiast directly.
  • Parameters of circulating fan
    Electrical power:eighteen.5KW,6-pole, 3phase
    Connecting format:immediate-related
    Rated rotate pace:960r/min(400V/50HZ)
    Enthusiast wheel:7# centrifugal impeller(Diameter:700mm),
    Wind stress:1000Pa,
    Flow rate:12800 M3/h.
  • Shaft sealing
    Operating with drinking water cooling to promise a long life, the shaft drinking water cooling with independent water pump and flow change to be equipped to check h2o flow and routinely alarm/quit the cycle if there is not enough water circulation.

four.6 Temperature checking components 
Temperature thermocouples: 2 pcs, K variety, including HMI checking, info-acquisition and control.

four.7 Pressure Components

  • Inlet and exhau EPT valve, proportionally controlled, Electric handle valve.
  • Guide exhau EPT valve, 3-piece ball valve.
  • Force transducer: 1
  • Precision: +/- 50mbar
  • Strain gauge:1

4.8 Control Technique

  • Manage Program is produced based mostly on the analysis and improvement toward rubber vulcanization processing sector, including the PLC central managing part, touch monitor (HIM) operation system and network, it is a person friendly, condition of the art, programmable digital system.
  • Password safeguarded entry obtain, operator can log into the method by accessing the security login form with a name and password.
  • It is automatic controlling, recording and graph the temperatures and force of the autoclave, audible alarms for high or lower temperatures or force.
  • Manual operation display allows operator take handbook handle temperature, stress, and valves as allowed.
  • It can insert or conserve the product working recipe, display the stress and temperature curve at any time and its paperless record purpose can comprehend report, help save and check out of method curve and process parameters.
  • It has in excess of-temperature and overpressure alarm and different security protection functions.
  • Client can run sign up, login and typing in merchandise information, and comprehend intranet or remote handle. 
  • Interaction to a Personal Personal computer allowed (Teamviewer ), with developed in software program to system, document and graph of approach in actual time.
  • World wide web relationship via Team-Viewer (VPN) with our Company.

four.9 Safety Method
 

4.9.1 Mechanical basic safety interlock I
Safety limit deal with is interlocked with the lid. Personnel have to switch the handle to unlock the  safety system then the lid can be opened.

four.9.2 Electrical basic safety interlock II
The security system functions with security limit take care of and connects with our ECC. When personnel operate the reducer and basic safety restrict handle, whilst there is force in the autoclave, the ECC will give a audio-gentle alarm.

4.9.3 Protection valves
There is one safety valves on the best of autoclave. We have established a strain limit in the valves. When the stress exceed the restrict, the valves will work automatically to launch the air down to a sensible strain assortment.

five. Configurations of Autoclave

  • HMI: Wenview touch display, ZheJiang
  • PLC: Siemens
  • Main electrical component : Schneider,China
  • Constrained swap: Omron
  • AUTOCLAVE Shell: ASME Part VIII, Div 1, SINOMAC
  • EPT parts: Hualiang, China

Control cabinet in accordance to CE stHangZhourds

6. Equivalency of StHangZhourds and Codes
Reference Codes and StHangZhourds

6.1  ASME Boiler and Force Vessel Code (BPVC), Part VIII, Division 1: Guidelines for Construction of Pressure Vessels
6.2  AS 1210 – 2571 Force Vesse EPT
6.3  AS 4343 – 2005 Force Equipment – Hazard Levels
6.4  AS 3873 – 2001 Force Gear – Operation and Upkeep

7. Program EPT Look at (Indirect steam heating)

eight. Packing

eight.1  The products will be effectively packed / wrapped considering lengthy-length ocean and land transportation and rough managing that might take place in the absence of each events.
8.2  Proper safety from humidity, rust, mould, scratches, shaking, and so on, will be taken so that the items might get there at the set up internet site in good condition.
8.3  Shipping marks and warning signed will be plainly painted, and thorough packing li EPT (in English/Espanol) will be soundly connected, to the outside of the packing.

nine. Autoclave Specification
 

MODEL SN-LHG2560 VULCANIZATION AUTOCLAVE-TECHNICAL PARAMETER
No. Description Unit Specifications and Parameters
1 Effective Working Diameter mm 2500
two Effective Working Length mm 6000
three Autoclave Track Distance mm 900
four Design Pressure MPa 1
5 Max. Working Pressure MPa .eight
six Safety Valve Exhaust MPa .eighty five
7 Design Temperature ºC two hundred
8 Max. Working Temperature ºC 180
9 Temperature Uniformity at Steady State ºC ±2
ten Openning Door Mode Hydraulic
eleven Working Medium Compressed air
12 Heating Mode Steam indirect heating
thirteen Heating Power KW 162
fourteen Quantity of Circulating Fan Motor Established 1
fifteen Quantity of Circulating Fan Motor KW fifteen
16 Thermocouple Type Type K or J
seventeen Vaccum Lines Piece
18 Quantity of Vaccum Pressure Transducer Piece
19 StHangZhourd Control Mode PLC+Laptop
20 Control Software  Thermal Processing Control (TPC)
21 Insulation Type Inner
22 Insulation Material Ceramic Fiber
23 Insulation Thickness mm 75
24 Insulation Sheet Material Stainless Steel or Aluminized Steel
25 Working Environment Temperature ºC Min. -20ºC, ,Max. +45ºC
26 Working Environment Humidity <60%
27 Power Supply 400VAC, 3P+N+PE, 50/60Hz
28 Fat KG 16500

ten. Expert Workshop

eleven. SINOMAC International Turnkey Initiatives
With the experience of manufacture and services for 15 many years, our specialist team are in a position to supply the global turnkey project, which includes a skilled training. SINOMAC autoclaves can be made as ASEM, PED, EPT stHangZhourds, as well as our Chinese stHangZhourd.

From the SINOMAC Staff, with 15 several years of knowledge.

The use of original equipment manufacturer’s (OEM) element numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our organization and the outlined substitution parts contained herein are not sponsored, accredited, or created by the OEM.

China Chain and sprocket factory : Horizontal compare belt drive and chain drive garage door openers China in Managua Nicaragua  Industrial Steam Indirect Heating Rubber Vulcanization Autoclave with ce certificate top quality low price

China Chain and sprocket factory : Horizontal compare belt drive and chain drive garage door openers China in Managua Nicaragua  Industrial Steam Indirect Heating Rubber Vulcanization Autoclave with ce certificate top quality low price

China Chain and sprocket factory : Horizontal compare belt drive and chain drive garage door openers China in Managua Nicaragua  Industrial Steam Indirect Heating Rubber Vulcanization Autoclave with ce certificate top quality low price

China Chain and sprocket factory : Horizontal compare belt drive and chain drive garage door openers China in Managua Nicaragua  Industrial Steam Indirect Heating Rubber Vulcanization Autoclave with ce certificate top quality low price

Timing near me shop made in China – replacement parts – in Basilan City Philippines Belt Pulley with Flange with top quality

Timing  near me shop  made in China - replacement parts -  in Basilan City Philippines  Belt Pulley with Flange with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

timing belt pulley with flange&comma; Timing belt pulley&comma; aluminum timing pulley&comma; alumina timing pulley&comma; aluminium timing pulley&comma; steel timing pulley&comma; steel timing belt pulley&comma; belt pulley&comma; mxl timing pulley&comma; t2&period;5 timing pulley&comma; t5 timing pulley&comma; at20 timing pulley&comma; timing pulley t10&comma; timing belt tensioner pulleys&comma; double-sided timing belt&comma; oem timing pulley&comma; timing belt tensioner&comma; timing tensioner&comma; small timing belt pulley&comma; timing belt pulley&comma; conveyor belt pulleys

Our company can provide high quality standard type timing pulley or produce timing pulley according to the customers’ drawings and requirements&period; At present&comma; we have various kinds of CNC machines to meet different processing requirements&period;
If you have any needs&comma; please feel free to contact with us&comma; we will offer good quality with reasonable price&comma; timely delivery and great customer service to you&period;

Features&colon;
1&period; Teeth Type&colon; MXL&comma; XL&comma; L&comma; H&comma; XH&comma; XXH&comma; XXL&comma; SL9&comma; SL12&comma; SL&comma; HTD&colon; 3M&comma; 5M&comma; 8M&comma; 14M&comma; 20M AND SO ON
2&period; Metric System&colon; T-type series&lpar;T2&period;5&comma; T5&comma; T10&comma; T20&rpar;
3&period; H EPT type&lpar;3M&comma; 5M&comma; 8M&comma; 14M&rpar;
4&period; STPD&sol;STS type&lpar;S2M&comma; S3M&comma; S4&period;5M&comma; S5M&comma; S8M&comma; S14M&rpar;
5&period; The British System&colon; MXL&comma; XL&comma; L&comma; H&comma; X
6&period; Material&colon; 1045 carbon steel&comma; aluminum alloy frequently used&comma; brass and nylon available&period;
7&period; Surface treatment&colon; Black oxdizing&comma; phosphating&comma; anodize&comma; zinc-plating
8&period; Tolerance&colon; Conform to customers requirement
9&period; OEM&sol;ODM service&colon; Offered

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Timing  near me shop  made in China - replacement parts -  in Basilan City Philippines  Belt Pulley with Flange with top quality

Timing  near me shop  made in China - replacement parts -  in Basilan City Philippines  Belt Pulley with Flange with top quality

Factory price made in China – replacement parts – in Krakow Poland Supply Take up Conveyor Pulley for Belt Conveyor with top quality

Factory  price  made in China - replacement parts -  in Krakow Poland  Supply Take up Conveyor Pulley for Belt Conveyor with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive Pulley           500 500

Length of the pulley depends on 

the belt width of the conveyor 

650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend Pully           500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

 

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Factory  price  made in China - replacement parts -  in Krakow Poland  Supply Take up Conveyor Pulley for Belt Conveyor with top quality

Factory  price  made in China - replacement parts -  in Krakow Poland  Supply Take up Conveyor Pulley for Belt Conveyor with top quality

Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Conveyor slat conveyor belt China in Jubayl Saudi Arabia Parts Tabletop Chains Multiflex Chain Belt for Conveyor with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Conveyor slat conveyor belt China in Jubayl Saudi Arabia  Parts Tabletop Chains Multiflex Chain Belt for Conveyor with ce certificate top quality low price

We – EPG Team the most significant Chain and agricultural gearbox factory in China with 5 various branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

With EPG brand name registered in a lot more than 70 international locations like The us , Europe , Japan and so on, it has associates amongst entire world prime enterprises, this kind of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so forth.Our Hangzhou EPG Co.,Ltd. , was launched in November, 1997. With its 5 wholly owned subsidiaries.huge stock ranges on zinc plated, sound metal shaft collars assure prompt pleasure of any dimensions prerequisite. Unplated, black-oxide and stainless metal reliable collars are easily accessible. Black-oxide metal clamp type collars are similarly stocked for unbeatable services. Mounted bearing and linear bearing orders are routinely shipped inside 24 several hours and our switch-about time on cut-to-length linear shafting will exceed your expectations. Normal solitary-strand roller chain, standardized by ASME, is an assembly of alternating pin back links and roller links. The length among pin facilities is named the pitch. The pitch is what categorizes the measurement of the chain. The greater the pitch, the greater the load score. Chains with little pitches carry more compact loads, operate far more quietly, and at greater speeds. Multi-strand, little-pitch roller chains are a great resolution for large-load, substantial-speed apps.

                             
Solution details:

Item Title plastic tabletop chains
Content PP POM
Coloration as request 
width  as request 
Packing as request 
Certification ISO Fda SGS
MOQ 10 meter 
Port HangZhou

Application:

Glass bottle,plastic bottle,metallic container,plastic bags ,carton label foodstuff,beverage,plastic bottle,
metallic contaciner,plastic luggage,Prescribed drugs,Electron, Chemical Industry, Auto: +86~13083988828 Component.

Business introduction:

Shangdong EPT Transmission Products Firm Specializing in several varieties of conveyor machines over 30 several years.

Largely for Modular conveyor belt,plastic slat chain,steel leading chains,adaptable chains and conveyor elements

With our very own design and style, analysis & development team,We will supply you with realistic value and be EPT of good quality assurance.

Welcome to our manufacturing facility.

Certificate:

Our Provider:

1. Your inquiry will be replied inside 24 several hours and on the web services is available all the time.
2. EPT trained & professional income people are here prepared to response all your questions and handle the difficulties.
three. Delivery time: within 5~25 days soon after agreement. 
four. Payment phrases: T/T, L/C, O/A, Western Union, Paypal, Escrow, etc.
5. Great following-sale service provided, make sure you get again if you got question.

make contact with:
 

  PLEASE Send out INQUIRYIES 

The use of first tools manufacturer’s (OEM) element numbers or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the shown substitute areas contained herein are not sponsored, approved, or produced by the OEM.

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Conveyor slat conveyor belt China in Jubayl Saudi Arabia  Parts Tabletop Chains Multiflex Chain Belt for Conveyor with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Conveyor slat conveyor belt China in Jubayl Saudi Arabia  Parts Tabletop Chains Multiflex Chain Belt for Conveyor with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Conveyor slat conveyor belt China in Jubayl Saudi Arabia  Parts Tabletop Chains Multiflex Chain Belt for Conveyor with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Conveyor slat conveyor belt China in Jubayl Saudi Arabia  Parts Tabletop Chains Multiflex Chain Belt for Conveyor with ce certificate top quality low price

China Chain and sprocket factory : Ideal agricultural bank of china working hours in Bucharest Romania PVC Conveyor Belt Conveyor with ce certificate top quality low price

China Chain and sprocket factory : Ideal agricultural bank of china working hours  in Bucharest Romania  PVC Conveyor Belt Conveyor with ce certificate top quality low price

We – EPG Team the largest Chain and agricultural gearbox factory in China with 5 diverse branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Due to our sincerity in supplying ideal service to our customers, comprehending of your requirements and overriding perception of responsibility toward filling buying demands,a specialised supplier of a full assortment of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes…. If you want any information or samples, make sure you get in touch with us and you will have our quickly reply.EPT chains, each normal and non-common, are manufactured of: ○ Higher quality steels: proportions and adapted chemical composition for the distinct chain parts ○ The most efficient producing processes: • Specific method for the production of bushes bettering the chain dress in resistance ( EPT know-how) • Plates produced by multi-phase processing resources guaranteeing a typical pitch ( EPT technological innovation) ○ Satisfactory mechanical and warmth remedies of chain areas: • Shot peening • Floor finishing • Situation hardening, carbonitriding, quenching, tempering … • EPT®treatment • Freezing treatment • Corrosion safety coatings (GEOMET, zinc, nickel plating, …) ISO 9001 licensed manufacturer of precision roller chains. Kinds consist of one and a number of strand, hollow pin, facet bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless metal, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. Substantial quality  belt conveyor
EPT Euipment
EPT Tempered Glass Chain Belt EPT Table
EPT Stainless Metal Nylon Belt EPT Table
EPT Stainless Metal Roller EPT Desk
EPT Stainless Metal EPT Belt
 
Performance & Features
The conveyor produced by our organization is an economic conveying unit &commawhich is suitable for conveying power and granule materia EPT under 100Kg&periodIt has this sort of attributes as steady operation &commalow sound &commacontinuous conveying and beautiful physical appearance&periodIn addition to conveying normal materia EPT &commathe belt conveyor can also convey oil-resistant&commaheat-resistant&commaanticorrosive and anti-static unique materials&period of time
 
Software&colon
Broadly used in mining&comma metallurgy&comma chemical&comma foundry&comma creating materia EPT and EPT industries as nicely as transportation and manufacturing lines hydropower construction internet sites and port and EPT manufacturing departments Relevant supplies&colonThe use of ongoing or intermittent motion conveyor belt to transportation the following products or powder 100KG shape&comma teeth-like object&comma which runs higher-speed&comma stable&comma reduced noise&comma and can transmit much more than downhill Rewards&colonMine conveyor is the be EPT successful steady transport gear&comma compared to EPT transportation equipment &lparsuch as locomotive course&rpar&comma has prolonged distance transportation&comma large volume&comma constant conveyor&comma and so on&period&comma but reliable&comma and straightforward to apply automatic and centralized handle&comma particularly for large-produce and productive mine&comma conveyor has turn into the coal mining engineering and products&comma electromechanical integration essential products&periodThe primary attribute is the belt conveyor entire body can effortlessly scalable&comma function stocker warehouse&comma tail can progress with the coal face stretched or shrunk&comma compact&comma not to established the foundation&comma laid immediately on the roadway flooring&comma lightweight chassis&comma disassembly is extremely handy&periodWhen the transmission capability and transportation distance is large&comma it can be equipped with intermediate drives to meet the specifications&time period According to transportation engineering requirements&comma single shipping&comma but also multi-amount synthesis device or inclined transportation method to transport components&time period

Complex Parameters

Design Eco-friendly PVC Belt Conveyor
Certification ISO9001
Material of body Substantial Density PVC&solCarbon metal&solStainless steel
Curve Degree ninety degree or one hundred eighty diploma &commaany degree&commacan be personalized
Load capacity 1-200kg&solm3
Velocity -20m&solmin
Belt variety Rubber&comma Eco-friendly PVC&comma White Foods Grade PU
Voltage 220&sol380V 50HZ
 

Our item
Our firm is specialized in producing conveyor equipments&comma like screw conveyor&comma belt conveyor&commaNet Conveyor&commachain conveyor&comma drag conveyor&commatrimmer conveyor&commaRoller Conveyor&comma roller conveyor&commaSeal conveyor&commaEtc&periodLength 3-30m &commawidth and peak the conveying gear for a variety of industries can also be custom-made according to buyer needs &periodThe products have been extensively employed in assembly &commapacking producing line &commafood&commamedicine&commabeverage and EPT industries requiring no air pollution&periodIn get to satisfy the masses of buyers on the range of items need&comma our firm customizes equipment that content buyers primarily based on their true needs&interval

Why pick our product
one&period High quality is our soul
2&time period With SGS certification & ISO 9001 certificate
3&interval Can be customized according to customer’s requirerments
four&period of time More than ten-yr daily life time&period 
five&time period Put on-Resistant
6&period of time Be EPT service

About Us
HangZhou Li&Li Mechanical Equipment Co&comma &periodLtd&periodIs professional company that mainly operates style&comma manufacture&comma set up and debugging of cosmetic&comma pharmaceutical&comma chemical&comma meals&comma etc&periodEquipments&periodEnterprise strictly implements the ISO9001 stHangZhourd administration&comma with sturdy technological force&comma comprehensive detection products&comma advanced process and complete product variety which such as all types of Response Kettle&comma agitator bathtub&comma storage tank&comma vacuum emulsifying machine&comma conveyor&comma filling device and non-stHangZhourd equipments procedure and manufacture&semiElectrical engineering&comma automated-control engineering&comma pipe design and style and gear set up&period

The use of first products manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our organization and the outlined replacement components contained herein are not sponsored, approved, or made by the OEM.

China Chain and sprocket factory : Ideal agricultural bank of china working hours  in Bucharest Romania  PVC Conveyor Belt Conveyor with ce certificate top quality low price

China Chain and sprocket factory : Ideal agricultural bank of china working hours  in Bucharest Romania  PVC Conveyor Belt Conveyor with ce certificate top quality low price

China Chain and sprocket factory : Ideal agricultural bank of china working hours  in Bucharest Romania  PVC Conveyor Belt Conveyor with ce certificate top quality low price

China Chain and sprocket factory : Ideal agricultural bank of china working hours  in Bucharest Romania  PVC Conveyor Belt Conveyor with ce certificate top quality low price

China Chain and sprocket factory : Double belt drive chain drive comparison China in Ludhiana India Strand Industrial Conveyor Forged Chains with ce certificate top quality low price

China Chain and sprocket factory : Double belt drive chain drive comparison China in Ludhiana India  Strand Industrial Conveyor Forged Chains with ce certificate top quality low price

We – EPG Team the greatest Chain and agricultural gearbox manufacturing unit in China with 5 different branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

We inspect each piece of bearing by ourselves before supply.ISO We offer OEM support. 9001 licensed maker of precision roller chains. Kinds contain single and a number of strand, hollow pin, facet bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless metal, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. Despite the fact that we just take delight in becoming “Collar Specialists”, our knowledge in sourcing high quality merchandise has created Lucas Industrial a valued provider of other electricity transmission items as effectively. First amid these are linear bearings with interchanges obtainable for nearly all styles and sizes. Other energy transmission products available via Lucas Industrial incorporate leaf chain, roller chain, lumber conveying chain, rigid couplings, ball bearings, and sprockets. Specs

Chain No. Pitch
P
Sidebar   Pin   Average Ultimate Strength
Q(KN)
Weight
(for each Url)
(kg)
Case Hardness Case Depth
(mm)
Core Hardness
T(mm) H(mm) D(mm) A(mm)
102NA 102 seven.00 36 fourteen 28 one hundred eighty .38 C57-C62 .5 C40
125NA 125 10.00 35 sixteen 36 two hundred .70 C57-C62 .six C40
142NA 142 12.00 50 25 forty two three hundred 1.08 C57-C62 .seven C40
142HA 142 sixteen.50 fifty 25 sixty two 450 one.76 C57-C62 .seven C40
150NA 150 thirteen.00 49 25 36 300 one.20 C57-C62 .7 C40
160NA one hundred sixty 13.00 forty four.5 20 forty two 350 one.thirty C57-C62 .eight C40
175NA one hundred seventy five sixteen.00 sixty 30 72 520 two.seventy three C57-C62 1. C40
200NA two hundred 18.00 sixty thirty 68 600 two.eighty five C57-C62 1. C40
216NA 216 19.00 seventy five 35 fifty nine 600 3.66 C57-C62 one. C40
250NA 250 18.00 75 32 70 seven hundred four.26 C57-C62 1. C40
260NA 260 21.00 seventy five 32 seventy one 700 five.38 C57-C62 one. C40

Our principal merchandise(chains, sprockets and shafts)

Payment terms

T/T and L/C are largely obtainable

Delivery &packaging
Supply time:Goods in stock:ten-fifteen times
Products out of stock:twenty-30days

Delivery methods:By sea or by air

About us

 

 

• EPT Industrial Keeping Co., Ltd located in HangZhou Town, ZheJiang Province, China, has much more than twenty several years experience in this sector.

•We target on: Welded chains, Ca EPT chains, EPT chains, Cast chains, Stainless Steel Chains, Sprockets, Gears and and so forth.

•All our stHangZhourd items are manufactured according to AISI / JIS/ISO stHangZhourd.For non-stHangZhourd types, drawing will be submitted for acceptance based on samples or offered drawings

 

Our advantages

Large good quality:Shing has applied a strict and full quality manage program, which assures that every single chain can satisfy top quality needs of buyers and all chains have been strictly inspected just before packaging.
Competitive value: EPT constantly supply the be EPT cost!We in no way end striving to discover new techniques to reduce our co EPT based mostly on maintaining the top quality so that we can supply our customer a competitive price.
Swift Shipping and delivery time:We are fully commited to function hard to make certain that each cargo of our goods is risk-free and punctual.We have a lot of associates which constantly supply the mo EPT fast implies of transportation.
Good provider: EPT has diverse series and mode EPT for diverse stHangZhourds and we are dedicated to delivering the be EPT services.
Huge output: EPT has specialist gear for sugar chains.We have the potential to generate much more than 20, 000 meters /month
OEM accepted:We settle for OEM function. EPT can manufacture sidebars, bushes, pins and rollers of chains as customers’ ask for.

FAQ

one.What is the creating process?
Manufacturing procedure such as uncooked material cutting, device processing, grinding, components cleaning, assemble, cleansing, stoving, oil coating, include pressing, tests, package deal.

two.How to management the products good quality?
Combining superior gear and rigid management, we supply substantial stHangZhourd and high quality chains for our buyers all more than the planet.

3.What is the transportation?
If modest quantity, we Sugge EPT to send out by specific, this sort of as DHL, UPS, TNT FEDEX.If massive quantity, by sea.

4.Can we design packaging?
Yes.We can make customer’s personal packing.

5.Can you offer OEM service?
Sure, we perform on OEM orders.Which means measurement, amount, style, packing solution, and so on will rely on your requestsAnd your emblem will be tailored on our items.

 

 

 

The use of original gear manufacturer’s (OEM) component numbers or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our firm and the detailed replacement areas contained herein are not sponsored, accepted, or produced by the OEM.

China Chain and sprocket factory : Double belt drive chain drive comparison China in Ludhiana India  Strand Industrial Conveyor Forged Chains with ce certificate top quality low price

China Chain and sprocket factory : Double belt drive chain drive comparison China in Ludhiana India  Strand Industrial Conveyor Forged Chains with ce certificate top quality low price

China Chain and sprocket factory : Double belt drive chain drive comparison China in Ludhiana India  Strand Industrial Conveyor Forged Chains with ce certificate top quality low price

China Chain and sprocket factory : Double belt drive chain drive comparison China in Ludhiana India  Strand Industrial Conveyor Forged Chains with ce certificate top quality low price