Tag Archives: reduction motor

China Hot selling Wp Series Foot-Mounted Worm Reduction Gearbox AC Motor Horizontal Worm Gearbox Reducer

Product Description

WP Series Foot-Mounted worm reduction gearbox AC Motor Horizontal Worm Gearbox Reducer

Components:
1. Housing: Cast Iron
2. Gears: Worm Gears, 1 stage
3. Input Configurations:
CHINAMFG Input Shaft
Motor Flange – IEC B5
4. Output Configurations:
CHINAMFG Output Shaft
Hollow Output Shaft

Features:
1. Different variants, both input and output shafts can be mounted horizontally or vertically

2. Compact structure

3. Direct drive or indirect drive available

4. Output could be CHINAMFG shaft or hollow hole

Models & Variants:
WPA Series – Lower Input Shaft
WPS Series – Upper Input Shaft

WPDA Series – Lower Input Flange
WPDS Series – Upper Input Flange.
WPO Series – Vertical Upward Output Shaft

WPX Series – Vertical Downward Output Shaft

WPDO Series – Vertical Upward Output Shaft, Input Flange
WPDX Series – Vertical Downward Output Shaft, Input Flange 
Gearbox Parameters

Frame Size Center Distance Gear Ratio
WPA40 40 10/1, 15/1, 20/1, 25/1, 30/1, 40/1, 50/1, 60/1
WPA50 50
WPA60 60
WPA70 70
WPA80 80
WPA100 100
WPA120 120
WPA135 135
WPA147 147
WPA155 155
WPA175 175
WPA200 200

Product picture:

Our company :
1.More than 35 years experience in R&D and manufacturing, export gear motors & industrial gearboxes.
2. Standardization of the gearbox series
3. Strong design capability for large power & customized gearboxes.
4.High quality gearboxes and proven solutions provider.
5.Strict quality control process, stable quality.
6 Less than 2% of the quality complaints.
7.Modular design, short delivery time.
8.Quick response & professional services.

Customer visiting:

Our Services:

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

If you have any demand for our products please feel free to contact me.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Agricultural Machinery
Function: Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step
Customization:
Available

|

winch drive

How do winch drives contribute to the adaptability and versatility of mechanical systems in various settings?

Winch drives play a significant role in enhancing the adaptability and versatility of mechanical systems in various settings. Here’s a detailed explanation of how winch drives contribute to adaptability and versatility:

  • Flexible Load Handling:

Winch drives offer flexibility in load handling, allowing mechanical systems to adapt to different requirements. They can handle a wide range of loads, from light to heavy, and provide precise control over the lifting, lowering, and positioning of loads. The ability to adjust the speed, torque, and direction of the winch drive enables it to accommodate different load characteristics and operational needs. This flexibility makes winch drives suitable for a variety of applications, including construction, manufacturing, marine, entertainment, and transportation industries.

  • Variable Speed and Control:

Winch drives provide variable speed control, allowing mechanical systems to adapt to different operating conditions and tasks. The speed of the winch drive can be adjusted to match the specific requirements of the application, whether it involves slow and precise movements or fast and efficient operations. Additionally, winch drives offer precise control over acceleration, deceleration, and stopping, enabling smooth and controlled movements. This variable speed and control capability enhance the adaptability and versatility of mechanical systems in handling diverse tasks and operating in different environments.

  • Multiple Mounting Options:

Winch drives are available in various configurations and mounting options, offering flexibility in installation and integration into different mechanical systems. They can be mounted horizontally, vertically, or at custom angles, depending on the specific requirements of the application. This versatility in mounting options allows winch drives to be easily incorporated into existing systems or adapted to fit space constraints in different settings. Whether it’s a stationary installation, mobile equipment, or overhead lifting system, winch drives can be positioned and mounted in a way that optimizes their functionality and adaptability.

  • Integration with Control Systems:

Winch drives can be integrated with control systems, automation technologies, and other mechanical components, enhancing the adaptability and versatility of the overall system. They can be connected to programmable logic controllers (PLCs), human-machine interfaces (HMIs), or central control systems, enabling seamless integration and coordination with other equipment and processes. This integration allows for synchronized operations, centralized control, and automation of complex tasks, making the mechanical system more adaptable to changing requirements and versatile in different settings.

  • Modularity and Scalability:

Winch drives often have modular designs, which facilitate easy customization, expansion, and scalability of mechanical systems. Additional winch drives can be added or existing ones can be reconfigured to accommodate changing load capacities or operational needs. This modularity allows mechanical systems to adapt to evolving requirements without significant redesign or replacement of the entire system. It provides the flexibility to scale up or down the capabilities of the system, making it versatile and adaptable to different settings and applications.

In summary, winch drives contribute to the adaptability and versatility of mechanical systems through their flexible load handling capabilities, variable speed and control, multiple mounting options, integration with control systems, and modularity. By incorporating winch drives, mechanical systems can adapt to different tasks, environments, and operational demands, making them versatile and suitable for a wide range of settings and applications.

winch drive

What factors should be considered when selecting a winch drive for specific applications?

When selecting a winch drive for specific applications, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed explanation of the key factors that should be taken into account:

  • Load Capacity:

The load capacity is one of the most critical factors to consider when selecting a winch drive. It refers to the maximum weight or force that the winch can handle safely and efficiently. It’s essential to evaluate the anticipated loads in the specific application and choose a winch drive with a sufficient load capacity to handle those loads. Selecting a winch drive with inadequate load capacity can result in safety hazards, reduced performance, and potential damage to the winch or the load being lifted or pulled.

  • Power Source:

The power source of the winch drive is another crucial consideration. Winch drives are available in electric, hydraulic, and pneumatic variants, each with its own advantages and limitations. The choice of power source depends on factors such as the availability of power, the required pulling power, and the specific application’s environmental conditions. Electric winch drives are commonly used due to their ease of use and versatility. Hydraulic winch drives offer high pulling power for heavy-duty applications, while pneumatic winch drives are suitable for hazardous or explosive environments where electrical components are not permitted.

  • Control Mechanisms:

The control mechanisms of the winch drive play a significant role in the efficiency and ease of operation. Consider the control options available for the winch drive, such as manual control, remote control, or integrated control systems. Remote control systems, for example, allow operators to control the winch drive from a safe distance, enhancing safety and flexibility. Additionally, some winch drives offer features like variable speed control, which allows for precise positioning and controlled movement of the load.

  • Environmental Conditions:

The environmental conditions in which the winch drive will be used should be carefully assessed. Some winch drives are designed to withstand harsh environments, such as extreme temperatures, moisture, dust, or corrosive substances. For example, in marine applications, winch drives need to be corrosion-resistant and capable of operating in wet and salty conditions. Assessing the specific environmental conditions and selecting a winch drive with appropriate protection and durability features ensures its longevity and reliable performance.

  • Mounting and Installation:

The mounting and installation requirements of the winch drive should be considered to ensure proper integration into the intended application. Evaluate factors such as space availability, mounting options (e.g., vehicle-mounted, structure-mounted, or portable), and compatibility with existing equipment or systems. Some winch drives may require additional accessories or modifications for installation, so it’s important to factor in these considerations during the selection process.

  • Safety Features:

Winch drives should be equipped with appropriate safety features to prevent accidents and ensure secure operation. Common safety features include overload protection, emergency stop mechanisms, limit switches, and braking systems for load holding. These safety features contribute to the safe operation of the winch drive and protect against potential hazards or damage caused by excessive loads or unexpected circumstances.

  • Reliability and Maintenance:

Consider the reliability and maintenance requirements of the winch drive. Look for winch drives from reputable manufacturers known for producing high-quality and reliable equipment. Assess factors such as maintenance intervals, ease of maintenance, availability of spare parts, and after-sales support. Choosing a winch drive that is reliable and has accessible maintenance options ensures minimal downtime and long-term cost-effectiveness.

By considering these factors when selecting a winch drive for specific applications, you can make an informed decision that aligns with the load requirements, power source availability, control preferences, environmental conditions, and safety considerations of your intended application.

winch drive

What are the advantages of using a winch drive in comparison to other lifting mechanisms?

Using a winch drive as a lifting mechanism offers several advantages over other lifting mechanisms. The unique characteristics and capabilities of winch drives make them a preferred choice in various applications. Here’s a detailed explanation of the advantages of using a winch drive in comparison to other lifting mechanisms:

  • Versatility:

Winch drives offer versatility in terms of their application and adaptability to different industries. They can be utilized in a wide range of scenarios, including off-road recovery, marine operations, construction sites, and recreational activities. Winch drives can handle various load sizes and weights, making them suitable for both light and heavy lifting tasks. The ability to use winch drives in diverse environments and industries makes them a flexible and versatile choice for lifting and pulling operations.

  • Control and Precision:

Winch drives provide precise control over the lifting and pulling operation. The gearing system allows operators to adjust the speed and direction of the winch drive, enabling accurate positioning and controlled movement of the load. This level of control is particularly beneficial in applications where precise load placement or delicate handling is required. Winch drives allow for fine adjustments and smooth operation, resulting in improved precision and reduced risk of damage to the load or surrounding structures.

  • Pulling Power:

Winch drives are designed to generate significant pulling power, allowing them to handle heavy loads effectively. The power source, whether it’s an electric motor or hydraulic system, provides the necessary energy to generate substantial pulling force. This makes winch drives suitable for tasks that involve moving or lifting heavy objects, such as in construction, industrial settings, or vehicle recovery. The pulling power of winch drives gives them an advantage over other lifting mechanisms that may have limited capacity or require additional equipment for handling heavier loads.

  • Compactness and Portability:

Winch drives are generally compact and portable, which enhances their usability in various settings. They can be easily mounted on vehicles, equipment, or structures, offering mobility and convenience. Compact winch drives are particularly useful in off-road vehicles, where space may be limited. The portability of winch drives allows for flexibility in different applications and enables their use in remote or challenging locations where other lifting mechanisms may not be easily accessible.

  • Safety:

Winch drives are designed with safety features to ensure secure and controlled lifting operations. These features may include overload protection, emergency stop mechanisms, and limit switches. The braking system in winch drives provides reliable load holding, preventing unintentional load release. Additionally, winch drives can be equipped with remote control systems, allowing operators to maintain a safe distance during operation. The safety features and control mechanisms of winch drives contribute to enhanced safety and minimize the risk of accidents or injuries.

These advantages make winch drives a preferred choice over other lifting mechanisms in many applications. The versatility, control, pulling power, compactness, portability, and safety features of winch drives provide distinct benefits that cater to the specific requirements of lifting and pulling operations in various industries and scenarios.

China Hot selling Wp Series Foot-Mounted Worm Reduction Gearbox AC Motor Horizontal Worm Gearbox Reducer China Hot selling Wp Series Foot-Mounted Worm Reduction Gearbox AC Motor Horizontal Worm Gearbox Reducer
editor by Dream 2024-05-03

China Professional Right Angle Geared Motor Reduction Gearbox Worm Reducer 12V

Product Description

 

Product Description

 

D45 Model Motor

This compact 45mm diameter motor, featuring a worm gear reducer box, is designed for efficiency and durability. Despite its small size and lightweight design, it offers high load torque, minimal noise, and a long lifespan. Perfect for applications like automatic table and chair lifting, as well as automatic curtains.

Key Features:

  • 45mm diameter motor

  • Worm gear reducer box

  • High load torque

  • Low noise

  • Long service life

Manufacturer Information:

Product Description:

Introducing the Auto Smart Electric Motor Gear 45mm by HangZhou Xihu (West Lake) Dis. Motor Co., Ltd.

 

Experience the compact and efficient design of this customizable speed reducer, perfect for industrial applications. The Auto Smart Electric Motor Gear 45mm offers smooth operation and a durable build, ensuring reliability in your operations.

Model Voltage

Unit: VDC

 No load speed

Unit: rpm

 Noload current

Unit: mA

 Stall torque

Unit: kg.cm

 Gear ratio
D45-40 12V 150 rpm 60mA 6.4 kg.cm 40:1
D45-65 12V 90 rpm 60mA 10 kg.cm 65:1
D45-150 12V 40 rpm 60mA 24 kg.cm 150:1
D45-200 12V 30 rpm 60mA 25 kg.cm 200:1
D45-260 12V 23 rpm 60mA 25 kg.cm 260:1
D45-340 12V 18 rpm 60mA 25kg.cm 340:1
D45-600 12V 10 rpm 60mA 25 kg.cm 600:1
D45-1000 12V 6 rpm 60mA 25kg.cm 1000:1

 
 

D52 Electric Motor for Household Appliances

This D52 electric motor, manufactured by HangZhou Xihu (West Lake) Dis. Motor Co., Ltd., is perfect for a variety of household appliances including electric drying racks, ice breakers, lifting tables, and mechanical equipment. Its compact size, high torque, and easy installation make it a versatile choice for your needs. Additionally, the output shaft size can be customized to meet your specific requirements.

Features:

  • Small size

  • Large torque

  • Easy to install

 

Products Type Voltage Power No Load Load Gear ratio Motor length
Speed Current Speed Current Torque
VDC W RPM A RPM A N.M mm
D52R-2440-270 24 40 270±20 ≤0.8 200±20 ≤4.5 ≥1.5 2:34 64
D52R-2430-110 24 30 110±10 ≤0.8 75±5 ≤4.0 ≥3.5 1:45 64
D52R-2415-55 24 15 55±5 ≤0.8 38±5 ≤3.0 ≥3.0 1:51 64
Remarks
 		     

Detailed Photos

Product Parameters

52mm Worm Gear Motor with Encoder

 

Introducing the efficient BLDC gear motor from HangZhou Xihu (West Lake) Dis. Motor Co., Ltd. This motor is designed for industrial use, providing quiet, durable, and powerful performance. With a customizable speed reducer, this motor is perfect for a wide range of versatile applications.

   

 

Introducing our Encoder Equipped 52mm Worm Gear Motor

 

A compact and efficient BLDC gear motor designed for versatile industrial applications. Manufactured by HangZhou Xihu (West Lake) Dis. Motor Co., Ltd., this motor features a customizable speed reducer that delivers durable and powerful performance.

 

Certifications

Packaging & Shipping

Installation Instructions

Company Profile

 

Welcome to HangZhou Xihu (West Lake) Dis. Motor Co., Ltd.

 

Specializing in AC and DC motors for various applications such as kitchen appliances, air flow products, and more. With 16 years of experience, we provide quality motion solutions tailored to customer needs. Our offerings include superior customer service, high-quality products, innovative designs, and competitive prices. Compliant with EU and American standards, ensuring safety and social responsibility. Partner with us for your next project and experience CHINAMFG in motor solutions.

          

 

Introducing the Encoder Equipped 52mm Worm Gear Motor

 

by HangZhou Xihu (West Lake) Dis. Motor Co., Ltd.

 

A compact, efficient, and customizable motor designed for industrial applications. The Encoder Equipped 52mm Worm Gear Motor offers precision and reliability, making it ideal for a wide range of industrial uses.

 

Customer photo
 

FAQ

Q1. What about the payment way?
A1. By TT at sight or trade assurance. 30% down payment should be paid after contract is valid, 70% balance should be paid before shipment.

Q2. How long is the guarantee?
A2. We offer you high quality motors with 12 months guarantee and reply you as soon as possible within 5 hours.

Q3. If the motor some parts is broken 1 day, how can we get help from you?
A3. We will send you spare parts free of charge If they are in warranty, not including easy-broken parts. For easy-broken parts, we will only charge a cost fee.

Q4.How does your factory do regarding quality control?
A4.We have CE certificate and we have a special QC department in charge of products’ quality. If you also need other certificates, we also can help to apply.

Q5. What is your packaging?
A5. Our conventional packaging is: After doing the anti-rust treatment, wrap the plastic film around the machine and then fix the motor on the wooden bracket.

Q6. How can we check the motor before delivery?
A6. We can provide online checking when testing the motor on site. We will take and prepare detailed testing videos for your checking before the delivery. We accept third-party testing. Except above points,we will provide detailed testing report.
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal, Industrial, Household Appliances, Car, Power Tools, DC Worm Gear Motor
Operating Speed: Low Speed
Excitation Mode: Excited
Function: Driving
Casing Protection: Open Type
Number of Poles: 2
Customization:
Available

|

winch drive

What are the signs that indicate a need for winch drive replacement or maintenance, and how can they be diagnosed?

Winch drives, like any mechanical component, require regular maintenance and may eventually need replacement. Here’s a detailed explanation of the signs that indicate a need for winch drive replacement or maintenance and how they can be diagnosed:

  • Unusual Noises:

If you notice unusual noises such as grinding, squealing, or rattling coming from the winch drive, it may indicate a problem that requires maintenance. These noises can be caused by worn-out gears, misaligned components, or damaged bearings. Diagnosing the issue involves inspecting the winch drive for any visible signs of damage or wear, and listening carefully to identify the source of the noise. Professional technicians can perform a thorough examination, including disassembling the winch drive if necessary, to identify the specific cause and determine if repair or replacement is needed.

  • Excessive Vibration:

If the winch drive exhibits excessive vibration during operation, it may be a sign of misalignment, loose connections, or worn-out components. Excessive vibration can lead to accelerated wear and potential damage to the system. To diagnose the issue, visual inspection should be conducted to check for loose bolts, misaligned shafts, or damaged mounting brackets. Additionally, measuring and analyzing the vibration levels using specialized equipment can provide valuable insights into the severity of the problem. Based on the findings, appropriate maintenance actions can be taken, such as realigning components or replacing worn-out parts.

  • Reduced Performance:

If the winch drive exhibits reduced performance, such as slower operation, decreased pulling force, or inconsistent speed control, it may indicate the need for maintenance or replacement. Reduced performance can be caused by various factors, including worn-out gears, insufficient lubrication, motor issues, or electrical problems. Diagnosing the cause involves conducting performance tests to measure parameters such as speed, torque, and load capacity. Additionally, a comprehensive inspection of the winch drive’s components, including motors, gearboxes, and control systems, can help identify any underlying issues affecting performance. Based on the findings, appropriate maintenance or replacement measures can be taken to restore optimal performance.

  • Fluid Leaks:

Fluid leaks, such as oil or hydraulic fluid, around the winch drive are clear signs of a potential problem. Fluid leaks can indicate damaged seals, gaskets, or hoses, which can lead to loss of lubrication or compromised hydraulic systems. Diagnosing fluid leaks involves visually inspecting the winch drive for any signs of leakage, including oil stains, puddles, or wetness around the components. Identifying the source of the leak is crucial to determine the appropriate maintenance or replacement actions required, such as replacing seals or repairing hydraulic lines.

  • Overheating:

If the winch drive becomes excessively hot during operation, it may indicate a need for maintenance or replacement. Overheating can be caused by factors such as inadequate ventilation, overloading, or motor issues. Diagnosing overheating involves monitoring the temperature of the winch drive during operation, using infrared thermometers or temperature sensors. Additionally, inspecting the cooling mechanisms, such as fans or heat sinks, and checking for any obstructions or malfunctions can provide insights into the cause of overheating. Depending on the severity of the issue, actions such as cleaning, adjusting ventilation, or replacing overheating components may be necessary.

In summary, signs that indicate a need for winch drive replacement or maintenance include unusual noises, excessive vibration, reduced performance, fluid leaks, and overheating. Diagnosing these signs involves visual inspection, performance testing, monitoring, and analysis to identify the specific cause. Engaging professional technicians or maintenance personnel who are familiar with winch drives can help ensure accurate diagnosis and appropriate maintenance or replacement actions to address the identified issues.

winch drive

What safety considerations should be taken into account when using winch drives?

Using winch drives involves certain safety considerations to ensure the well-being of operators, prevent accidents, and protect the equipment and the load being lifted. Here’s a detailed explanation of the safety considerations that should be taken into account when using winch drives:

  • Operator Training:

Proper training is essential for operators who will be using winch drives. They should receive comprehensive training on the safe operation of winch drives, including understanding the controls, procedures, safety features, and potential hazards. Training should cover load calculations, safe working loads, and the importance of following safety guidelines and manufacturer’s instructions.

  • Equipment Inspection:

Prior to each use, winch drives should be thoroughly inspected to ensure they are in proper working condition. This includes checking for any signs of damage, wear, or corrosion. The cables or ropes should be inspected for fraying, kinks, or other defects. Any damaged or malfunctioning components should be repaired or replaced before operating the winch drive.

  • Load Capacity:

It is crucial to adhere to the specified load capacity of the winch drive. Exceeding the maximum load capacity can lead to equipment failure, accidents, and injuries. Operators should accurately determine the weight of the load to be lifted and ensure it falls within the winch drive’s rated capacity. If the load exceeds the capacity, alternative lifting methods or equipment should be used.

  • Secure Anchoring:

Winch drives should be securely anchored to a stable and appropriate mounting point. This ensures that the winch drive remains stable during operation and prevents unintended movement. The anchoring point should be capable of withstanding the forces generated during lifting or pulling operations. Proper anchoring minimizes the risk of equipment tipping over or shifting unexpectedly.

  • Personal Protective Equipment (PPE):

Operators should wear appropriate personal protective equipment (PPE) when using winch drives. This may include safety helmets, gloves, eye protection, and high-visibility clothing. PPE helps protect operators from potential hazards such as falling objects, flying debris, or contact with moving parts. The specific PPE requirements should be determined based on the nature of the lifting operation and any applicable safety regulations.

  • Safe Operating Distance:

Operators and other personnel should maintain a safe distance from the winch drive during operation. This prevents accidental contact with moving parts or the load being lifted. Clear warning signs or barriers should be used to define the restricted area around the winch drive. Operators should never place themselves or others in the potential path of the load or in a position where they could be struck by the load in case of a failure or slippage.

  • Emergency Stop and Controls:

Winch drives should be equipped with emergency stop mechanisms or controls that allow operators to quickly halt the operation in case of an emergency. All operators should be familiar with the location and operation of the emergency stop controls. Regular testing and maintenance of these controls are essential to ensure their effectiveness in emergency situations.

  • Proper Rigging and Rigging Techniques:

Correct rigging techniques should be followed when attaching the load to the winch drive. This includes using appropriate slings, hooks, or attachments and ensuring they are properly secured. Improper rigging can lead to load instability, shifting, or falling, posing a significant safety risk. Operators should be trained in proper rigging techniques and inspect the rigging components for wear or damage before each use.

  • Regular Maintenance:

Winch drives should undergo regular maintenance as recommended by the manufacturer. This includes lubrication, inspection of cables or ropes, checking for loose bolts or connections, and verifying the functionality of safety features. Regular maintenance helps identify and address potential issues before they lead to equipment failure or accidents.

By considering these safety measures, operators can ensure the safe and effective use of winch drives, minimizing the risk of accidents, injuries, or equipment damage. It is crucial to prioritize safety at all times and to comply with applicable safety regulations and guidelines.

winch drive

What are the advantages of using a winch drive in comparison to other lifting mechanisms?

Using a winch drive as a lifting mechanism offers several advantages over other lifting mechanisms. The unique characteristics and capabilities of winch drives make them a preferred choice in various applications. Here’s a detailed explanation of the advantages of using a winch drive in comparison to other lifting mechanisms:

  • Versatility:

Winch drives offer versatility in terms of their application and adaptability to different industries. They can be utilized in a wide range of scenarios, including off-road recovery, marine operations, construction sites, and recreational activities. Winch drives can handle various load sizes and weights, making them suitable for both light and heavy lifting tasks. The ability to use winch drives in diverse environments and industries makes them a flexible and versatile choice for lifting and pulling operations.

  • Control and Precision:

Winch drives provide precise control over the lifting and pulling operation. The gearing system allows operators to adjust the speed and direction of the winch drive, enabling accurate positioning and controlled movement of the load. This level of control is particularly beneficial in applications where precise load placement or delicate handling is required. Winch drives allow for fine adjustments and smooth operation, resulting in improved precision and reduced risk of damage to the load or surrounding structures.

  • Pulling Power:

Winch drives are designed to generate significant pulling power, allowing them to handle heavy loads effectively. The power source, whether it’s an electric motor or hydraulic system, provides the necessary energy to generate substantial pulling force. This makes winch drives suitable for tasks that involve moving or lifting heavy objects, such as in construction, industrial settings, or vehicle recovery. The pulling power of winch drives gives them an advantage over other lifting mechanisms that may have limited capacity or require additional equipment for handling heavier loads.

  • Compactness and Portability:

Winch drives are generally compact and portable, which enhances their usability in various settings. They can be easily mounted on vehicles, equipment, or structures, offering mobility and convenience. Compact winch drives are particularly useful in off-road vehicles, where space may be limited. The portability of winch drives allows for flexibility in different applications and enables their use in remote or challenging locations where other lifting mechanisms may not be easily accessible.

  • Safety:

Winch drives are designed with safety features to ensure secure and controlled lifting operations. These features may include overload protection, emergency stop mechanisms, and limit switches. The braking system in winch drives provides reliable load holding, preventing unintentional load release. Additionally, winch drives can be equipped with remote control systems, allowing operators to maintain a safe distance during operation. The safety features and control mechanisms of winch drives contribute to enhanced safety and minimize the risk of accidents or injuries.

These advantages make winch drives a preferred choice over other lifting mechanisms in many applications. The versatility, control, pulling power, compactness, portability, and safety features of winch drives provide distinct benefits that cater to the specific requirements of lifting and pulling operations in various industries and scenarios.

China Professional Right Angle Geared Motor Reduction Gearbox Worm Reducer 12V China Professional Right Angle Geared Motor Reduction Gearbox Worm Reducer 12V
editor by Dream 2024-04-25

China 32mm Turbine worm square reduction motor curtain electric motor for Electric curtain manufacturer

Guarantee: 3 years
Relevant Industries: Residence Use, Other, Electric curtain
Bodyweight (KG): .2 KG
Tailored support: OEM, ODM, OBM
Gearing Arrangement: Worm
Enter Speed: 10-100(rpm)
Output Velocity: /
Merchandise identify: Worm Equipment Reducer
Software: Electrical curtain
Key phrase: Reduction Gearbox
Rated electricity: 5(w)
Rated voltage: twelve(v)
Rated pace: 55(rpm)
Rated torque: 1.5nM
Rated present: .8A
effectiveness: 95%
Port: HangZhou

Merchandise Description Customizable add-ons: motor duration, shaft, voltage, power, rated velocity.CharacteristicsA.Energy range: 5-20 (KM).B.Prosperous stock and rapidly shipping time inside ten working times.C.Speed and direction can be personalized.D.Customizable dimensions assortment from sixteen mm to 60 mm.E.Strong controller stability.F.Support life exceeds 10000 consecutive hours.G.Belongs to permanent magnet brushless motor.

Housing Materialcustomzied request
Gear Materialscustomized ask for
Outer diametercustomized or you can decide on from underneath gearbox’s specification table
Backlash at no-load≤ .5°
Test Ask forRoHs , Salt Spray or consumer ask for
Protect NecessityWater evidence , dust evidence , explosion evidence or custom-made request
Sample TimeUsually want 15-25days
Order Amount RequestAccept sample purchase and combined buy
Work Temperature range-twenty~120°C
software
ProgramsApps
Organization Equipmentintelligent robotic.Copiers and Scanners.3D Printers.Tattoo pen.Lampblack equipment.New strength charging lock.Promoting equipment.
Electric powered powered equipmentElectric toothbrush,Electric powered resource,adult erotica products, Runshine RXYK0850 hay and straw baler equipment Electric powered toy vehicle,Electrical curtain.Razor.Electric Drill.Cosmetic instrument.
Sensible PropertyIntelligent window opener ,vacuum cleaner, Wise coffee Equipment,hair drier,Therapeutic massage Gun,Fan,air cleaner,Hair elimination Gadget,door lock,Clever door lock.Water pump.Air Multiplier.
Foods and BeverageHand Blenders, Blenders, Mixers, Coffee Machines, Food Processors, Juicers, Fryers, Ice Makers, bevel spiral equipment Soy Bean Milk Makers.
Health caresphygmomanometer, Massaging mattress, Air pump, Urine Analyzer.
RoboticsSweeping Robot.Servicing robotics, Foods shipping and delivery robot, Reception robot, Health-related serving robot, Convenying robot, Inspection robot.Underwater robot.
Firm Profile HangZhou CZPT motor HangZhou CZPT Motor Co., Ltd. is a professional brushless motor investigation and development and production makers. In 2019, it handed the nationwide large-tech enterprise certification. The firm has a team of twenty years engaged in the motor industry senior R & D engineering staff, has rich expertise in approach technological innovation and manufacturing management, and the introduction of the most superior automated production products and Japan and Germany imported screening products. Quality 1st, steady advancement, CZPT is our purpose. Our motors are commonly employed in health-related units, smart residences, residence appliances, LQ high quality CZPT hand chain hoist TD standard hand chain block Producer 2ton chain block price tag drinking water pumps,air pumps, smart toys, sport consoles, energy resources, health and fitness tools, individual care goods and other fields. VR Equipment & Creation line Certifications Packing & Delivery Transport time:DHL: 3-5 functioning times UPS: 5-7 functioning times TNT: 5-7 operating times FedEx: 7-9 functioning days EMS: twelve-15 doing work daysPost: Depends on ship to which country Sea: Relies upon on ship to which place.To much better make certain the basic safety of your products, specialist, environmentally friendly, practical and efficient packaging providers will be supplied.
packagingDimensions of circumstanceGross fat of carton
cartons375mm*260mm*265mm.48kg
Why Select Us Support hotline

worm reducer

Worm reducer gearbox – What You Need to Know

When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.

Features

Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.

Functions

Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.

Applications

This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
worm reducer

Cost

Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.

aspect

Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
worm reducer

Worm gear reducer gearbox oil

Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.

China 32mm Turbine worm square reduction motor curtain electric motor for Electric curtain manufacturer China 32mm Turbine worm square reduction motor curtain electric motor for Electric curtain manufacturer
editor by Cx 2023-07-06

China OEM High Quality Skm Series Skm58b Electric Motor Worm Gear Transmission Reduction Gearbox for Sale with Hot selling

Product Description

Recommended by seller

Technical features

The high degree of modularity is a design feature of SKM.SKB series helical-hypoid gear unit. It can be connected respectively with motors such as normal motor, brake motor, explosion-proof motor, frequency conversion motor, servo motor, IEC motor and so on. This kind of product is widely used in drive fields such as textile, footstuff, ceramice packing, logistic, plastics and so on

 

 

 

Product Parameters

Applicable Industries

Garment Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory

Gearing Arrangement

Hypoid

Output Torque

100~500NM

Input Speed

1400rpm

Output Speed

5~187

Place of Origin

China

Brand Name

HUAKE

Product name

Hypoid gear reducer

Color

Blue

Ratio

5-400

Certificate

ISO9001 CCC CE

 

Products characteristics

SKM SKB Series helical gear units has more than 4 types, power 0.12-4kw, ratio 7.73-302.5, torque max 100-500NM, Modulaw and multistructure can meet the demands of various conditions.

(1) Ground-hardened helical gears.
(2) Modularity, can be combined in many forms
(3) Made of high-quality aluminum alloy, light in weight and nonrusting
(4)Large in output torque, high efficiencym energy saving and environmental protection
(5) The mounting dimension of SKM series are compatible with SMRV series worm gear unit
(A part of SMRV050 dimensions are different from SKM28)
(6) The mounting dimension of SKB series are compatible with W series worm gear unit.

Features&Specification

SKM28B~SKM58B:2-Stage hypoid helical gear units. Speed ratio range7.48~60.5 SKM28C~SKM58C:3-Stage hypoid helical gear units. Speed ratio range:4918~302.5 One of the features of the hypoid gear speed reducer is that the shafts intersect at 2 mutually parallel planes,providing greater torque in the same construction space than an ordinary helical gear reducer. And its strength is much higher than that of worm gear reducer. 1.Omnidirectional mounting 2.Housing made of high-quality aluminum alloydie-casting,light weight good rust resistance 3.Low back clearance 4.Smooth transmission and low noise 5.Customized products available

For more models, please contact us!

F helical gear reducer

Parallel output, compact structure, large transmission torque, stable operation, low noise and long life.

Installation method: base installation, flange installation, torque arm installation.

Reduction ratio: basic type 2 level 4.3-25.3, 3 level 28.2-273, combined to 18509.

The rotation direction of the input and output of the basic two-stage is the same, and the three-stage is opposite; please consult when combining.

Output mode: hollow shaft output or CZPT shaft output.

Average efficiency: Level 2 96%, Level 3 94%, F/CR average efficiency 85%.

K helical bevel gear reducer

Vertical output, compact structure, hard tooth surface transmission torque, high-precision gears ensure stable work, low noise
and long life.

Installation method: base installation, flange installation, torque arm installation, small flange installation.
Input mode: motor direct connection, motor belt connection or input shaft, connection flange input.

Output mode: hollow shaft output or CZPT shaft output, the average efficiency is 94%.

Reduction ratio: basic type 8.1-191, combined to 13459.

R helical gear reducer

Small bias output, compact structure, maximum use of cabinet space, the second and third levels are in the same cabinet. Using an integral cast box, the box structure has good rigidity, which is easy to improve the strength of the shaft and the life of the
bearing.

Installation method: pedestal installation, flanges with large and small flanges are easy to choose.

Solid shaft output, the average efficiency is 96% in the second stage, 94% in the third stage, and 85% in CR/CR. The CRM series specially designed for mixing can carry large axial and radial forces.

Company Profile

 

Certifications

 

Packaging & Shipping

 

FAQ

 

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Transmission Parts
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Single-Step
Samples:
US$ 80/Piece
1 Piece(Min.Order)

|
Request Sample

worm reducer

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
worm reducer

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
worm reducer

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China OEM High Quality Skm Series Skm58b Electric Motor Worm Gear Transmission Reduction Gearbox for Sale with Hot selling China OEM High Quality Skm Series Skm58b Electric Motor Worm Gear Transmission Reduction Gearbox for Sale with Hot selling
editor by CX 2023-06-01

China Industrial Speed Reduction Gear Motor Transmission Gear Reducer Worm Gearbox worm gearbox advantages

Product Description

 

Merchandise Description

Primary Supplies:
1)housing:aluminium alloy ADC12(measurement 571-090) die solid iron HT200(size 110-one hundred fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat treatment method make gear area hardness up to fifty six-62 HRC Soon after precision grinding, carburization layer’s thickness between .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-one

Comprehensive Photographs

Combination Options:
Input:with input shaft, With sq. flange,With IEC regular input flange
Output:with torque arm, output flange, solitary output shaft, double output shaft, plastic go over
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Laptop, NMRV+UDL, NMRV+MOTORS

Exploded Look at:

Merchandise Parameters

 
Old Model     		   New Model     Ratio     Center Distance  Power Input Dia.  Output Dia.    Output Torque Excess weight
RV571     7.5~100   25mm   .06KW~.12KW  Φ9 Φ11 21N.m  .7kgs
RV030 RW030 7.5~a hundred 30mm   .06KW~.25KW Φ9(Φ11) Φ14 45N.m  one.2kgs
RV040 RW040 7.5~100 40mm   .09KW~.55KW Φ9(Φ11,Φ14) Φ18(Φ19) 84N.m  2.3kgs
RV050 RW050 7.5~one hundred 50mm   .12KW~1.5KW Φ11(Φ14,Φ19) Φ25(Φ24) 160N.m  three.5kgs
RV063 RW063 7.5~one hundred 63mm   .18KW~2.2KW Φ14(Φ19,Φ24) Φ25(Φ28) 230N.m  six.2kgs
RV075 RW075 7.5~100 75mm   .25KW~4.0KW Φ14(Φ19,Φ24,Φ28)  Φ28(Φ35) 410N.m  9.0kgs
RV090 RW090 seven.5~one hundred 90mm   .37KW~4.0KW Φ19(Φ24,Φ28) Φ35(Φ38) 725N.m  thirteen.0kgs
RV110 RW110 7.5~a hundred 110mm   .55KW~7.5KW Φ19(Φ24,Φ28,Φ38)   Φ42 1050N.m  35.0kgs
RV130 RW130 seven.5~one hundred 130mm   .75KW~7.5KW Φ24(Φ28,Φ38) Φ45 1550N.m  forty eight.0kgs
RV150 RW150 7.5~100 150mm     2.2KW~15KW Φ28(Φ38,Φ42) Φ50   84.0kgs

GMRV Define Dimension:

GMRV A B C C1 D(H8) E(h8) F G G1 H H1 I M N O P Q R S T BL β b t V  
030 80 ninety seven 54 44 14 fifty five 32 fifty six sixty three sixty five 29 fifty five forty fifty seven 30 seventy five 44 six.five 21 5.5 M6*10(n=4) 0° five sixteen.three 27
040 100 121.five 70 sixty 18(19) sixty 43 71 seventy eight seventy five 36.five 70 50 71.5 40 87 55 6.five 26 six.5 M6*ten(n=4) 45° six 20.8(21.8) 35
050 one hundred twenty one hundred forty four 80 70 twenty five(24) 70 49 eighty five ninety two eighty five forty three.five eighty sixty 84 50 100 64 eight.five 30 seven M8*twelve(n=4) 45° eight 28.3(27.3) forty
063 a hundred and forty four 174 a hundred 85 25(28) eighty 67 103 112 95 53 ninety five 72 102 sixty three one hundred ten 80 8.five 36 eight M8*twelve(n=8) 45° 8 28.3(31.3) 50
075 172 205 120 90 28(35) 95 seventy two 112 one hundred twenty 115 57 112.5 86 119 75 a hundred and forty 93 11 40 ten M8*fourteen(n=8) 45° 8(ten) 31.3(38.3) sixty
090 206 238 a hundred and forty a hundred 35(38) one hundred ten seventy four a hundred thirty 140 one hundred thirty 67 129.5 103 135 ninety 160 102 13 forty five 11 M10*sixteen(n=8) 45° ten 38.3(41.3) 70
110 255 295 170 a hundred and fifteen forty two a hundred thirty – 144 a hundred and fifty five a hundred sixty five 74 a hundred and sixty 127.5 167.five one hundred ten two hundred a hundred twenty five 14 50 fourteen M10*eighteen(n=8) 45° 12 45.three 85
a hundred thirty 293 335 200 one hundred twenty 45 180 – one hundred fifty five 170 215 81 179 146.five 187.5 a hundred thirty 250 one hundred forty 16 sixty fifteen M12*20(n=8) 45° fourteen 48.8 a hundred
150 340 400 240 145 50 one hundred eighty – 185 two hundred 215 96 210 170 230 a hundred and fifty 250 a hundred and eighty 18 72.five eighteen M12*22(n=8) 45° fourteen fifty three.eight  120  

Company Profile

About CZPT Transmission:
We are a professional reducer producer positioned in HangZhou, ZHangZhoug province.
Our top products is  full selection of RV571-a hundred and fifty worm reducers , also equipped GKM hypoid helical gearbox, GRC inline helical gearbox, Personal computer models, UDL Variators and AC Motors, G3 helical gear motor.
Products are broadly utilised for programs this sort of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-producing, construction equipment, metallurgic mine, environmental protection engineering, and all sorts of automatic strains, and assembly traces.
With quickly supply, outstanding after-income provider, sophisticated generating facility, our merchandise promote well  both at home and overseas. We have exported our reducers to Southeast Asia, Japanese Europe and Middle East and so on.Our goal is to develop and innovate on basis of higher quality, and create a good track record for reducers.

 Packing data:Plastic Bags+Cartons+Wooden Instances , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Honest-Turkey Win Eurasia 

Logistics

Soon after Product sales Provider

one.Routine maintenance Time and Warranty:Within 1 calendar year after acquiring items.
two.Other Provider: Like modeling assortment information, set up guidebook, and issue resolution guide, etc.

FAQ

one.Q:Can you make as for each client drawing?
   A: Sure, we supply tailored services for customers accordingly. We can use customer’s nameplate for gearboxes.
two.Q:What is your phrases of payment ?
   A: 30% deposit before generation,equilibrium T/T just before shipping and delivery.
3.Q:Are you a trading firm or maker?
   A:We are a manufacurer with superior tools and knowledgeable employees.
four.Q:What is actually your generation potential?
   A:8000-9000 PCS/Month
five.Q:Totally free sample is offered or not?
   A:Yes, we can offer totally free sample if customer concur to pay out for the courier cost
six.Q:Do you have any certificate?
   A:Of course, we have CE certificate and SGS certification report.

Make contact with data:
Ms Lingel Pan
For any questions just truly feel cost-free ton speak to me. Numerous many thanks for your type attention to our firm!

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Right Angle
Gear Shape: Worm Gear
Step: Double-Step
Samples:
US$ 12/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|